The rice cake machine adopts the new technology of electric heating and electronic automatic temperature control to make the rice pulp denatured by water bath steaming, tackifying and polymerizing, screw pushing, kneading and extruding, and then it is cooked out of the machine. The rice cake is white and smooth with delicate and elastic taste, which solves the shortcomings of complicated and time-consuming manual production process
Notes on operation of rice cake machine:
1. The machine should be installed on the flat and hardened ground cake, and the ground wire should be marked according to the ground wire. Wooden sticks and other tools should not be used to assist the machine to enter the cake during operation. The above unsafe operation will easily lead to personal injury and machine damage.
2. Before starting the machine, check that there are no other sundries except rice cake on the roll rice cake and silk knife, especially the cloth and brush used. When the machine is running, it is very easy to bring the hand into the roll, and the power supply must be cut off to wipe the machine.
3. No load running in of the new machine can prolong its service life. When running in, the rice cake roll and the rice cake on the surface of the wire cutter are coated with edible oil, and the oil holes at both ends of the wire cutter, the gear of the wire cutter and the inner gear of the side cover are coated with mechanical oil. 4. When the machine is running in or running in, the abnormal noise should be eliminated in time, and the running in time should be more than 1 hour Use.
5. The head of broken rice cake can not be directly put into the rice cake bucket, so it should be broken by rice cake mixer. The important parts of this machine are rice cake rolling roll and wire cutter. The original parts should be used when changing.
6. After use, the machine should be cleaned up, especially on the New Year cake cutter. The remaining dry rice cake residue will make the New Year cake rolled out and destroy the cutter.
7. The insertion and removal of the wire cutter must be operated when the power supply is cut off. It is strictly forbidden to touch the wire cutter and other operating parts with hands to prevent personal injury.
8. The running parts of the bearing and all electrical components of the machine have been strictly screened. When the user changes the bearing grease once a year.
Article link: food machinery and equipment network https://www.foodjx.com/tech_ news/detail/346680.html